Granulated boiler KAMEN Pellet Plus 12 kW

KAMEN Pellet Plus 12 kW Pellet Boiler

The body of the Kamen Pellet Plus pellet boiler is made from certified 6 mm thick boiler steel 265GH and insulated with mineral wool.

The Kamen Pellet Plus pellet boiler is equipped with a state-of-the-art stainless steel "Comfort" burner with automatic ignition, capable of burning not only wood pellets but also grains and similar fuels.

This burner's operation is controlled by a modern electronic controller. The burner features a "Full Clean" function that automatically removes ash mechanically.

The boiler door can be opened to the left or right side. The upper door is for boiler cleaning.
 The fuel container can be placed on the left or right side of the boiler or at the front upon request.

The boiler is electronically controlled: when the temperature drops below the set point, the fuel ignites automatically (based on room thermostat data). When the room temperature reaches the set value, the boiler automatically shuts down and waits for the next controller command.
 Additionally, the installation of the feed and return pipe elbows can be ordered on the left or right side of the boiler.

 
• Heat exchanger warranty up to 6 years; *
 
• High efficiency (over 91%);
 
• Automatic ignition and shutdown;
 
• Automatic ash blowing;
 
• Temperature modulation;
 
• Heating system circulation pump control;
 
• Boiler circulation pump control (can prepare hot water in summer);
 
• Underfloor heating control;
 
• Servo drive control;
 
• Temperature regulation based on room thermostat;
 
• Boiler overheating alarm signal;
 
• Fuel shortage alarm signal;
 
• Pellet ignition and shutdown with one button press;
 
• Settings are saved (after power outage);
 
• Easy boiler cleaning;
 
• Simple operation;
 
• Heat exchanger made of 6 mm thick boiler steel;
 
• Large fuel capacity;
 
• Fuel container can be placed on the left, right, or front side of the boiler.

* The boiler room must be installed and the boiler connected according to the sample scheme (see illustrations) – equipped with a three-way or four-way mixing valve, suitable fuel is used, and other manufacturer requirements are followed.

 
• Power, kW: 12 kW
 
• Heat exchanger area, m²: 1.5
 
• Maximum boiler width (A2), mm: 1035
 
• Boiler width (A1), mm: 435
 
• Fuel container width, mm: 600
 
• Maximum boiler depth (B), mm: 925
 
• Boiler depth (B1), mm: 625
 
• Chimney length (B2), mm: 105
 
• Maximum boiler height (H)*, mm: 1220
 
• Boiler height (H1)*, mm: 1200
 
• Fuel container height, mm: 1200
 
• Feed pipe height (H2)*, mm: 1220
 
• Height to chimney center (H3)*, mm: 1015
 
• Chimney diameter (ØD), mm: Ø159
 
• Return pipe height (H4)*, mm: 290
 
• Loading width (K), mm: 263
 
• Loading depth (L), mm: 400
 
• Loading door width (N), mm: 275
 
• Loading door height (O), mm: 210
 
• Fuel capacity, Ltr/kg: 300/180
 
• Boiler weight, kg: 260
 
• Water volume in boiler, Ltr: 62
 
• Efficiency, %: 91-92%
 
• Max working pressure, bar: 1.5
 
• Boiler water temperature (min./max.), °C: 55/90
 
• Power supply, V/Hz: 230/50
 
• Chimney draft, Pa: 20
 
• Minimum chimney height, m: 6
 
• Min chimney diameter, (Ømm): Ø190
 
• Min chimney diameter, (cm×cm): 17×17
 
• Heated area, m²: 100-130

* Leg adjustment height from 24 mm to 32 mm (for boilers up to 40 kW).

More information available in downloadable files.

Manufacturer: KAMEN (Poland)

Product images are for illustrative purposes only and are exemplary. Video links in the product description are informational and may differ from the actual product. Original product colors, markings, parameters, dimensions, sizes, functions, and/or any other features may visually differ from reality, so please rely on the product properties indicated in the descriptions. For questions, please contact us via the email or phone number in the contact section.