Granulated boiler KAMEN Pellet Plus 17 kW

KAMEN Pellet Plus 17 kW Pellet Boiler

The body of the "Kamen Pellet Plus" pellet boiler is made from certified 6 mm thick boiler steel 265GH and insulated with mineral wool.

The Kamen Pellet Plus pellet boiler is equipped with a state-of-the-art stainless steel "Comfort" burner with automatic ignition, capable of burning not only wood pellets but also grains and similar fuels.
The burner operation is controlled by a modern electronic controller. The burner features a "Full Clean" function – ash is mechanically removed automatically.

The boiler door can open to the left or right side. The upper door is for cleaning the boiler.
Upon request, the fuel tank can be placed on the left or right side of the boiler, as well as at the front.

Boiler controlled by electronics: when the temperature drops below the set value, the fuel ignites automatically (based on room thermostat data). When the room temperature rises to the set value, the boiler automatically shuts down and waits for the next controller command.
Additionally, installation of the feed and return pipe elbows on the left or right side of the boiler is available upon order.

• Boiler heat exchanger warranty up to 6 years; *
• High efficiency (over 91%);
• Automatic ignition and shutdown;
• Automatic ash blowing;
• Temperature modulation;
• Heating system circulation pump control;
• Hot water boiler circulation pump control (can prepare only hot water during summer);
• Underfloor heating control;
• Servo drive control;
• Temperature regulation via room thermostat;
• Boiler overheating alarm;
• Fuel shortage alarm;
• Pellet ignition and shutdown with one button press;
• Settings are saved after power outages;
• Easy boiler cleaning;
• Simple operation;
• Heat exchanger made from 6 mm thick boiler steel;
• Large fuel capacity;
• Fuel tank can be located on the left, right, or front side of the boiler.

* The boiler room must be installed and the boiler connected according to the example scheme (see illustrations) – installed three-way or four-way mixing valve, appropriate fuel used, and other manufacturer requirements followed.

• Power, kW: 17 kW
• Heat exchanger area, m²: 1.8
• Maximum boiler width (A2), mm: 1090
• Boiler width (A1), mm: 490
• Fuel tank width, mm: 600
• Maximum boiler depth (B), mm: 925
• Boiler depth (B1), mm: 625
• Chimney length (B2), mm: 105
• Maximum boiler height (H)*, mm: 1220
• Boiler height (H1)*, mm: 1200
• Fuel tank height, mm: 1200
• Feed pipe height (H2)*, mm: 1220
• Height to chimney center (H3)*, mm: 1015
• Chimney diameter (ØD), mm: Ø178
• Return pipe height (H4)*, mm: 290
• Loading width (K), mm: 318
• Loading depth (L), mm: 400
• Loading door width (N), mm: 330
• Loading door height (O), mm: 210
• Fuel capacity, Ltr/kg: 300/180
• Boiler weight, kg: 280
• Water volume in boiler, Ltr: 70
• Efficiency, %: 91-92%
• Max. working pressure, bar: 1.5
• Boiler water temp. (min./max.), °C: 55/90
• Power supply, V/Hz: 230/50
• Chimney draft, Pa: 22
• Minimum chimney height, m: 7
• Min. chimney diameter, (Ømm): Ø200
• Min. chimney diameter, (cm×cm): 18×18
• Heated room area, m²: 130-170

* Leg height adjustable from 24 mm to 32 mm (for boilers up to 40 kW power).

More information available in downloadable files.

Manufacturer: KAMEN (Poland)

Product photos are for illustration purposes only and are examples. Video links in the product description are informational only, so the information provided may differ from the actual product. Original products' colors, labels, parameters, dimensions, sizes, functions, and/or any other properties may visually differ from reality, so please rely on the product properties stated in the descriptions. For questions, please contact us via email or phone listed in the contacts section.