Granulated boiler KAMEN Pellet Plus 25 kW

Pellet Boiler KAMEN Pellet Plus 25 kW

The body of the Kamen Pellet Plus pellet boiler is made of certified 6 mm thick 265GH boiler steel and insulated with mineral wool.

The Kamen Pellet Plus pellet boiler is equipped with the latest technology stainless steel "Comfort" burner with automatic ignition, capable of burning not only wood pellets, but also grains and other similar fuels.
This burner is controlled by a modern electronic controller. The burner features a "Full Clean" function – automatic mechanical ash removal.

The boiler doors can open to the left or right. The upper doors are for boiler cleaning.
On request, the fuel tank can be on the left, right, or in front of the boiler.

The boiler is electronically controlled: when the temperature drops to the set value, the fuel is ignited automatically (according to room thermostat data). When the room temperature reaches the set value, the boiler shuts off automatically and waits for the next command from the controller.
It is possible to additionally order the mounting of the boiler’s supply and return pipes on the left or right side of the boiler.

• Up to 6-year warranty for the boiler heat exchanger; *
• High efficiency (over 91%);
• Automatic ignition and shutdown;
• Automatic ash blowing;
• Temperature modulation;
• Control of the heating system circulation pump;
• Control of the boiler circulation pump (can be used to heat only hot water in summer);
• Underfloor heating control;
• Servo control;
• Temperature control via room thermostat;
• Boiler overheating alarm signal;
• Fuel shortage alarm signal;
• Pellet ignition and shutdown at the press of a button;
• Retains settings (after power outage);
• Easy boiler cleaning;
• Simple control;
• Heat exchanger made of 6 mm thick boiler steel;
• Large fuel tank;
• Fuel tank can be on the left, right, or front side of the boiler.

* the boiler room must be installed and the boiler connected according to the example scheme – a three-way or four-way mixing valve installed, appropriate fuel used, and other manufacturer requirements followed.
 

• Power, kW: 25 kW
• Heat exchanger area, m²: 2.8
• Maximum boiler width (A2), mm: 1140
• Boiler width (A1), mm: 540
• Fuel tank width, mm: 600
• Maximum boiler depth (B), mm: 975
• Boiler depth (B1), mm: 675
• Flue length (B2), mm: 105
• Maximum boiler height (H)*, mm: 1300
• Boiler height (H1)*, mm: 1280
• Fuel tank height, mm: 1200
• Supply pipe height (H2)*, mm: 1300
• Flue center height (H3)*, mm: 1095
• Flue diameter (ØD), mm: Ø178
• Return pipe height (H4)*, mm: 290
• Loading width (K), mm: 368
• Loading depth (L), mm: 450
• Loading door width (N), mm: 380
• Loading door height (O), mm: 210
• Fuel tank capacity, L/kg: 300/180
• Boiler weight, kg: 345
• Water volume in boiler, L: 95
• Efficiency, %: 91-92%
• Max. working pressure, bar: 1.5
• Boiler water temp. (min./max.), °C: 55/90
• Power supply, V/Hz: 230/50
• Flue draft, Pa: 28
• Minimum chimney height, m: 8
• Min. chimney diameter (Ømm): Ø220
• Min. chimney diameter (cm×cm): 20×20
• Heated area, m²: 220-280

* leg adjustment height from 24 mm to 32 mm (for boilers up to 40 kW).

More information available in downloadable files.

Manufacturer: KAMEN (Poland)

Product photos are for illustrative purposes only. Video links in the product description are informational only, and the information may differ from the actual product. The colors, labels, parameters, dimensions, sizes, functions, and/or any other features of original products may appear different due to visual properties. Please refer to the characteristics listed in the product descriptions. If you have any questions, please contact us via email or phone listed in the contact section.