Granulated boiler KAMEN Pellet Plus 34 kW

Pellet Boiler KAMEN Pellet Plus 34 kW

The body of the “Kamen Pellet Plus” pellet boiler is made of certified 6 mm thick boiler steel 265GH and insulated with mineral wool.

The Kamen Pellet Plus pellet boiler is equipped with the latest technology stainless steel “Comfort” burner with automatic ignition, capable of burning not only wood pellets but also grains and other similar fuels.

The burner is controlled by a modern electronic controller. The burner features the “Full Clean” function – ash is automatically removed mechanically.

The boiler door can be opened to the left or right side. The upper door is intended for boiler cleaning.
Upon request, the fuel tank can be on the left or right side of the boiler, or even in the front of the boiler.

The boiler is controlled electronically: when the temperature drops to the set value, the fuel ignites automatically (based on room thermostat data). When the room temperature reaches the set level, the boiler automatically shuts down and waits for the next controller command.
It is also possible to order the installation of the boiler’s supply and return pipe connections on the left or right side of the boiler.

• Up to 6 years warranty for the boiler heat exchanger; *
• High efficiency (over 91%);
• Automatic ignition and shutdown;
• Automatic ash removal;
• Temperature modulation;
• Control of the heating system circulation pump;
• Control of boiler circulation pump (hot water can be produced in summer);
• Underfloor heating control;
• Actuator control;
• Temperature regulation via room thermostat;
• Overheat alarm signal;
• Fuel shortage alarm signal;
• Pellet ignition and shutdown with one button press;
• Settings are retained (after power outage);
• Easy boiler cleaning;
• Simple operation;
• Heat exchanger made of 6 mm thick boiler steel;
• Large fuel tank;
• Fuel tank can be on the left, right side or front of the boiler.

* boiler room must be equipped and the boiler connected according to the sample pellet boiler connection diagram – three-way or four-way mixing valve installed, appropriate fuel used, and other manufacturer requirements followed.
 

• Power, kW: 35 kW
• Heat exchanger area, m²: 3.6
• Maximum boiler width (A2), mm: 1280
• Boiler width (A1), mm: 610
• Fuel tank width, mm: 600
• Maximum boiler depth (B), mm: 1060
• Boiler depth (B1), mm: 725
• Flue pipe length (B2), mm: 105
• Maximum boiler height (H)*, mm: 1300
• Boiler height (H1)*, mm: 1280
• Fuel tank height, mm: 1200
• Supply pipe height (H2)*, mm: 1300
• Flue center height (H3)*, mm: 1095
• Flue diameter (ØD), mm: Ø178
• Return pipe height (H4)*, mm: 290
• Loading width (K), mm: 438
• Loading depth (L), mm: 500
• Loading door width (N), mm: 450
• Loading door height (O), mm: 210
• Fuel tank capacity, L/kg: 300/180
• Boiler weight, kg: 410
• Water volume in boiler, L: 115
• Efficiency, %: 91-92%
• Max. working pressure, bar: 1.5
• Boiler water temp. (min./max.), °C: 55/90
• Electric supply, V/Hz: 230/50
• Chimney draft, Pa: 30
• Minimum chimney height, m: 9
• Minimum chimney diameter, (Ømm): Ø250
• Minimum chimney diameter, (cm×cm): 22×22
• Heated area, m²: 320-360

* adjustable leg height from 24 mm to 32 mm (for boilers up to 40 kW power).

More information in the downloadable files.

Manufacturer: KAMEN (Poland)

Product images are for illustration purposes only and are exemplary. Video links in the product description are for informational purposes only, and the content may differ from the actual product. The original product colors, labels, specifications, dimensions, sizes, functions, and/or any other features may differ visually from reality; therefore, please rely on the product specifications listed in the product description. If you have any questions, please contact us via email or phone as indicated in the contact section.